Blog Archives

My Cosplay: Part 2

Greetings one and all…

OK, so I have been a little bit lazy, or a lot lazy in fact. It’s been 9 months since I first posted part one of, My Cosplay with the intention of bringing updates often, but sometimes life just gets in the way! So, in recognition of Precinct1313’s one year anniversary, I return with part two!!

In case anyone needs a reminder of the first part, it can be; found here.

At the end of my last post I was thinking about the best way of making the Terminus Assault Armour (from Mass Effect 2 and 3) using EVA foam, and that is still the case, and it seems that  was a good call, as it’s so easy to use! I posted a picture of a friend of mine testing a part of it for his Blood Dragon Armour (from Mass Effect 2).



Well, his final outfit came out very well indeed:


During the building of the costume we discovered that the EVA Foam came in many different sizes, at the time we made the costume we didn’t know this, and so we ended up using 10mm foam. This has the problem that in places where the foam overlapped it ended up VERY thick, in some places there are as many as three layers totalling up to 30mm, in fact when wearing this costume you are unable to bring your arms down to your side and end up walking around a little like a gorilla with your arms out! We have since found out that there is a 6mm EVA Foam, which would be much better for making costumes overall.


The building process is fairly straightforward, the hardest part is sizing yourself for the Pepakura files, otherwise your outfit is not going to be a good fit. Once this is done all you have to do is print it out on paper and cut out the shapes:

pepakura ME

You will need a very sharp knife, beware the blade will blunt very quickly. Using a blunt blade will cause very rough edges which means you will have to spend more time having to smooth them off later on. Once cut out you will need a heat gun, you use the heat gun to blow hot air over the foam, this will help the foam to bend to shape, just hold it in the shape you want until it cools off and it will hold its new shape.

BE VERY CAREFUL WITH THE HEAT GUN! Oddly it gets VERY HOT, who would have thought!?

When you have it in the shape you want then you can use a hot glue gun to stick all the parts of foam together, again the HOT glue gun is VERY HOT!!!.

pepakura ME 2

Just remember to number the left and right side parts, you don’t want to make half your helmet only to find that you put a left side part on the right, and find out nothing fits once finished!

The helmet it more or less finished at this stage, or the shape of it anyway. What needs to be done now is to sand it down smooth, and get rid of any hot glue that is still visible, then give it a good coat of filler to cover any gaps, and then paint! job done! The base shape here only took a few hours on a Sunday to do, so not overly long. Next I need to use a motorbike visor for the eyepiece in the centre.

That’s it for now! I’ll post more at some point soon(ish)!

The Mass Effect … Blog Faves Presents: LMG Comics

shepard me

Welcome once again friends to another installment of Blog faves, where I point you in the direction of great blogs that I personally believe are fantastic and worthy of your time. There are literally millions of sites out there that don’t get the attention that they probably deserve, so I will be highlighting my favourites for your viewing pleasure.

Today’s recommendation is, this is a blog mainly used to promote an extremely entertaining web comic called Little Monster Girl, the artist/writer is talented and funny and I always enjoy my visit to the site … warning may contain boobs!

The Mass Effect … Blog Faves

shepard me

Welcome fellow bloggers to a new feature where I will direct you toward some of my favourite blogs on WordPress, my very own site is still in its relative infancy at only four months, but thanks to other fellow bloggers showing their support it has started to attract more readers and followers … so this is a way I can show my thanks. Today’s recommendation is –

Toy Meets World is actually the first blog I started following when I opened an account on WordPress, the site author is someone I have known for a number of years now (in the real world, not the virtual one!), Adam is a lovely guy and an extremely talented writer, his posts never fail to make me smile and at times laugh my arse off! So why not head over there and show his site some love … I absolutely guarantee you will adore his musings, definitely a hidden gem.

My Cosplay…

Greetings friends, as I said in my last post about the London Film and Comic-con, I was inspired to cosplay at next years event. So, did I choose some thing nice and easy?… of course not! I have chosen to make a full set of Terminus Assault Armour from the game –  Mass Effect 3 (It was also in ME2 as a pre-order unlock).

So what does it look like you might ask, well….



I have been thinking that the best way to make this armour set would be by using Pepakura, this is a program that has a vast community of people supporting it and lets you print out on card (paper not recommended)  all sorts of models, including armour sets from most games/films. You just print out the patterns, stick them together and you have your armour.

3view fr si ba

There are many ways to go about making the set, one way is to use Fibreglass mesh, on top of the card shapes you make using Pepakura, and sticking the mesh on with Fibreglass resin, which when it eventually sets will leave you with a rock hard but very light set of armour.

I have however chosen to use EVA Foam, this is the same stuff they use to the make interlocking foam mats that you see at the gym. It’s very light, but tough, also its nice and flexible when heated using a heat gun and when it cools it retains it shape. The plan is to use Pepakura to print out the parts of the armour then trace around the parts on the foam and cut them out, and so far testing has been going well…



This is just a little test a friend and I did on a helmet for Mass Effect’s Blood Dragon Armour, the eye shield is part of a motorcycle visor. A Dremel tool can be used to smooth off edges and seams.

That’s all for now, I will post more as the project advances…