Greetings one and all…
OK, so I have been a little bit lazy, or a lot lazy in fact. It’s been 9 months since I first posted part one of, My Cosplay with the intention of bringing updates often, but sometimes life just gets in the way! So, in recognition of Precinct1313’s one year anniversary, I return with part two!!
In case anyone needs a reminder of the first part, it can be; found here.
At the end of my last post I was thinking about the best way of making the Terminus Assault Armour (from Mass Effect 2 and 3) using EVA foam, and that is still the case, and it seems that was a good call, as it’s so easy to use! I posted a picture of a friend of mine testing a part of it for his Blood Dragon Armour (from Mass Effect 2).
Well, his final outfit came out very well indeed:
During the building of the costume we discovered that the EVA Foam came in many different sizes, at the time we made the costume we didn’t know this, and so we ended up using 10mm foam. This has the problem that in places where the foam overlapped it ended up VERY thick, in some places there are as many as three layers totalling up to 30mm, in fact when wearing this costume you are unable to bring your arms down to your side and end up walking around a little like a gorilla with your arms out! We have since found out that there is a 6mm EVA Foam, which would be much better for making costumes overall.
The building process is fairly straightforward, the hardest part is sizing yourself for the Pepakura files, otherwise your outfit is not going to be a good fit. Once this is done all you have to do is print it out on paper and cut out the shapes:
You will need a very sharp knife, beware the blade will blunt very quickly. Using a blunt blade will cause very rough edges which means you will have to spend more time having to smooth them off later on. Once cut out you will need a heat gun, you use the heat gun to blow hot air over the foam, this will help the foam to bend to shape, just hold it in the shape you want until it cools off and it will hold its new shape.
BE VERY CAREFUL WITH THE HEAT GUN! Oddly it gets VERY HOT, who would have thought!?
When you have it in the shape you want then you can use a hot glue gun to stick all the parts of foam together, again the HOT glue gun is VERY HOT!!!.
Just remember to number the left and right side parts, you don’t want to make half your helmet only to find that you put a left side part on the right, and find out nothing fits once finished!
The helmet it more or less finished at this stage, or the shape of it anyway. What needs to be done now is to sand it down smooth, and get rid of any hot glue that is still visible, then give it a good coat of filler to cover any gaps, and then paint! job done! The base shape here only took a few hours on a Sunday to do, so not overly long. Next I need to use a motorbike visor for the eyepiece in the centre.
That’s it for now! I’ll post more at some point soon(ish)!